Suzhou Association Issues Safety Self-Inspection Notice
Release Time:
2012-11-12 18:50
Source:
Suzhou Laundry Industry Association
Recently, the Suzhou Association issued the "Notice on Safety Self-Inspection by the Suzhou Laundry Industry Association," requiring laundry enterprises to strengthen safety self-inspection to ensure the smooth production during the peak laundry season. The notice is reproduced below for reference.
Notice on Safety Self-Inspection by the Suzhou Laundry Industry Association
To all member units:
The peak laundry season is approaching. Please conduct a comprehensive safety inspection of the company's electrical circuits, electromechanical equipment, etc., and provide training for all employees.
1. Basic concepts of safety production:
(1) The safety work of the enterprise must be personally managed by the main person in charge of the enterprise, who is the primary safety responsible person (not responsible for safety accidents caused by force majeure such as natural disasters, wars, etc., or building facilities);
(2) Safety work must be implemented simultaneously with the five aspects: planning, arranging, implementing, inspecting, and evaluating safety work;
(3) Production must obey safety and must be carried out under the premise of ensuring safety;
(4) The enterprise's safety work should focus on prevention and avoid hazards before they occur;
2. Four shutdowns after work: turn off electricity, water, steam, and close doors and windows;
3. Commonly used fire extinguishers include:
(1) 1211 fire extinguisher, dry powder fire extinguisher, carbon dioxide fire extinguisher, etc.
(2) The 1211 fire extinguisher is mainly used for extinguishing fires involving electrical (gas) equipment, instruments, and document data;
(3) The method of using the 1211 fire extinguisher is: pull out the pin, press the handle lever, and aim at the base of the flames to spray;
4. Conditions and causes that trigger fire accidents are:
(1) Open flames (sparks, fire sources) ignite combustible materials. The main type is electrical fires.
(2) Causes of electrical fires include: short circuits in electrical wiring, poor contact, aging and deterioration of electrical equipment (appliances), overload, leakage causing high temperature, electric arcs, electric sparks igniting combustible materials. Illegal operations of high-voltage switchgear and load control equipment can cause major accidents.
5. Common causes of electric shock accidents are:
(1) Aging insulation of electrical (equipment), metal shells not grounded or poorly grounded causing electric leakage and electric shock when personnel touch live parts;
(2) Live wires or live parts falling to the ground causing step voltage electric shock;
(3) Grounding wires or grounding bodies being unqualified, poorly connected, or damaged;
(4) Leakage protection switches and other electric shock protection devices malfunctioning or damaged and not operating when personnel touch live parts;
(5) Unqualified and uncertified personnel operating live equipment or violating operating procedures;
(6) Using unqualified electrical (appliance) products or non-standard installation;
(7) Other accidental causes.
6. The "Three No Let Go" after safety accidents:
(1) Do not let go without clarifying the cause of the accident;
(2) Do not let go if the person responsible for the accident and the public have not been educated;
(3) Do not let go without implementing corrective measures.
7. Annual inspection of pressure vessels: pressure vessels must be inspected annually, especially the annual inspection of safety valves must be taken seriously;
8. Annual inspection of insulating tools: insulating operating tools such as hot sticks, insulating gloves, insulating shoes, boots, etc. must be inspected annually;
9. Rescue after accidents: the principle of rescue after an accident is to save people first, then save property.
Suzhou Laundry Industry Association
November 9, 2012
Related Documents
undefined
Other News
2025.03.31
2025.03.19
2025.03.11
2025.03.10
2025.02.18
2025.02.18