Local Standard of Shaanxi Province for Quality Requirements of Garment Washing and Dry Cleaning
Release Time:
2009-09-21 19:24
Source:
China Laundry
Shaanxi Province Local Standard for Garment Washing and Dry Cleaning Quality Requirements
2005-09-09 16:23:28
Shaanxi Province Local Standard
Garment Washing and Dry Cleaning Quality Requirements
DB61/T272.1-1999
-----------------------------------------------------------------------------------
Shaanxi Province Local Standard for Garment Washing and Dry Cleaning Quality Requirements
2005-09-09 16:23:28
Shaanxi Province Local Standard
Garment Washing and Dry Cleaning Quality Requirements
DB61/T 272.1-1999
----------------------------------------------------------------------------------------
1 Scope
This standard specifies the technical requirements for color fastness, washing defects, and shaping of garments after washing in laundry shops (factories, companies, etc., hereinafter the same) engaged in garment washing and dyeing industry in our province.
This standard applies to officially operating laundry shops in this province.
2 Referenced Standards
The provisions contained in the following standards are incorporated into this standard by reference. The versions shown are valid at the time of publication of this standard. All standards are subject to revision, and users of this standard should consider using the latest versions of the following standards.
GB250—1995 Gray scale for assessing color change
GB251—1995 Gray scale for assessing staining
GB/T 3291.3-1997 Textile materials performance and test terminology
3 Definitions
This standard adopts the terminology of GB/T3291.3 and the following definitions.
3.1 Washing Defects
Defects caused by the washing process that remain on the garment and affect its appearance.
3.2 Color Spots
Irregular uneven color depth on the surface of the garment.
3.3 Shaping
The silhouette of the garment.
4 Garment Dry and Wet Washing Quality
4.1 Color Fastness Requirements
The color change of garments after dry cleaning and washing upon delivery to customers shall not be less than grade 4. The color difference between parts shall not be less than grade 4.
4.2 Washing Defect Requirements
No color spots or staining on any parts, no stains, lint, dust, or debris.
4.3 Shaping Requirements
4.3.1 The overall garment shape should be naturally smooth, without deformation, wrinkles, gloss, ironing marks, bubbling, button marks, or pocket flap marks; all provinces and province tips should be smooth and straight; all decorative parts should be intact.
4.3.2 The collar of the jacket should be smooth inside and out; both shoulders naturally shaped; front chest and back naturally smooth, chest full, symmetrical left and right, and rounded; sleeves rounded and smooth, cuffs smooth and close-fitting, cuffs above three seams full.
4.3.3 The surface of the lower garment should be smooth, without pocket marks, fish scale patterns, or creases; four seams aligned; ironing lines natural, crisp, and straight; pleats symmetrical and smooth; waistband flat without twists; hips rounded; trouser leg openings straight.
5 Part Division
5.1 Upper Garment Part Division (see Figure 1)
5.1.1 Part 1: includes collar surface, lapel, front and back bodice above the waistline, and large sleeves.
5.1.2 Part 2: includes front and back bodice below the waistline.
5.1.3 Part 3: includes small sleeves, front and back 5cm above the waistline at the hem seam.
5.2 Lower Garment Part Division (see Figure 2)
5.2.1 Part 1: includes 3/4 of the trouser length starting from the trouser leg.
5.2.2 Part 2: the other 1/4 of the trouser length; inside of the trousers, from the trouser leg starting at the halfway point, centered 5cm before and after the crotch seam.
5.2.3 Part 3: inside of the trousers, centered 5cm before and after the crotch seam, the other half.
Related Documents
undefined
Other News
2025.03.31
2025.03.19
2025.03.11
2025.03.10
2025.02.18
2025.02.18